Finninno Technology Transfer Package

Lift shaft mould - table of content

1. Production facilities and equipment
2. General description of the production line for elevator shaft moulds
3. Mould plates
4. Manufacture of base plate
5. Cover plate
6. Assembly of shafts
7. Stairs
8. Locking pin lifter
9. Concreting guard plates for shafts
10. Manufacture of inner mould sections
11. Manufacture of outer mould sections
12. Assembly of elevator shaft mould
13. Packing of mould for transport

Battery mould - table of content

1. Production facilities and equipment
2. Manufacture of mould plates
3. Intermediate walls
4. Support walls
5. Heating
6. Edges
7. Pull bars
8. Transfer rails
9. Transfer wheels
10. Work platforms, railing and stairs
11. Hydraulics

Table mould - table of content

1. Production facilities and equipment for table moulds
2. Manufacture and surface plate
   2.1. Alternative method / Manufacture of surface plate
3. Manufacture of frame of table moulds
4. Joining of frame of table mould to surface plate
5. Installation of base beams and hydraulic cylinders
6. Installation of edges and tilt steel section
7. Inspection of quality of completed table mould
8. Painting of table mould
9. Installation of vibration cylinders and hydraulics
10. Touch-up painting and other finishing work

Bathroom mould - table of content

1. Production facilities and equipment
2. General description of the production line for bathroom moulds (3D image)
3. Mould plates
4. Manufacture of bottom plate and lower body
5. Cover plate
6. Assembly of shafts
7. Manufacture of work platform and corner protection
8. Stairs
9. Shaft lifters
10. Concreting guards for shafts
11. Manufacture of inner mould sections
12. Manufacture of outer mould sections
13. Assembly of bathroom mould
14. Packing of mould for transport